ar3220d020002f

Install transverse leaf spring

Type ar · topic 32.20 · version 0200 · 2016-05-23

Applies to: Model 909

Where it sits

Function group 2 Chassis › 32 Suspension › 32.20 Steel springs, torsion bars, Niveaumat — Series 909

EinPAS 20 Chassis › 20.16 Suspension › 20.16.30 Spring/air suspension bellows/shock absorber/suspension strut — Series 909

AR32.20-D-0200-02F

Install transverse leaf spring

Model

909

Repair materials

Number

Designation

Order number

BR00.45-Z-1015-06A

Vaseline

Friedrich Scharr KG
Liebknechtstr. 50
70565 Stuttgart, Germany
Tel. +49 711 7868-481
Fax +49 711 7868-489
www.scharr.de

Install transverse leaf spring

1

Apply center marking on transverse leaf spring and front axle beam.



2

Bond upper spring rubber bushings to bearing brackets and clip into brackets on subframe.


Installation: Black bearing bracket = left side of vehicle
Red bearing bracket = right side of vehicle
Rubber bushing with red color coding = right side of vehicle



3

Grease lower side of rubber bushings (arrow).


D32.20-0013-01

Install transverse leaf spring

4

Coat spring bearings with assembly oil and push onto ends of springs to stop.


The chamfer (arrow) must point upwards.



5

Grease the spring ends of both rubber bushings.


D32.20-0012-01

Install transverse leaf spring

6

Insert transverse leaf spring with the outer spring bearings into the recess in the left and right transverse control arms.


The center markings on the spring and axle housing must align.


D32.20-0011-01

Install transverse leaf spring

7

Immobilize transverse leaf spring with vehicle jack and square timber against the two upper spring bearings.


D32.20-0010-01