ar3110p0010t
Trailer coupling shield, removal and installation
Type ar · topic 31.10 · version 0101 · 2006-09-19
Applies to: MODEL 211.0## /2## (except 211.023 /056 /076 /077 /223 /256 /276 /277) 1# with CODE (550) Trailer hitch except CODE (772) AMG styling package - front spoiler, side skirts and rear apron Anhängevorrichtung mechanisch abschwenkbar'
Where it sits
Function group 2 Chassis › 31 Frame, trailer operation › 31.10 Trailer coupling, fifth-wheel coupling — Series 211 (models 004, 006, 007, 008, 016, 020, 022, 024, 026, 028, 029, 041, 042, 052, 054, 057, 061, 065, 070, 072, 080, 082, 083, 084, 087, 089, 090, 092, 206, 207, 208, 216, 220, 222, 226, 241, 242, 252, 254, 257, 261, 265, 270, 272, 280, 282, 283, 284, 287, 289, 290, 292)
EinPAS 35 Body/frame/detachable parts › 35.25 Insulation/trim below/sealing/underbody protection › 35.25.40 Dampening/shielding/insulation mat — Series 211 (models 004, 006, 007, 008, 016, 020, 022, 024, 026, 028, 029, 041, 042, 052, 054, 057, 061, 065, 070, 072, 080, 082, 083, 084, 087, 089, 090, 092, 206, 207, 208, 216, 220, 222, 226, 241, 242, 252, 254, 257, 261, 265, 270, 272, 280, 282, 283, 284, 287, 289, 290, 292)
AR31.10-P-0010T
| Trailer coupling shield, removal and installation
| 17.6.04
|
MODEL 211.0## /2## (except 211.023 /056 /076 /077 /223 /256 /276 /277) 1#
with CODE (550) Trailer hitch
except CODE (772) AMG styling package - front spoiler, side skirts and rear apron
Anhängevorrichtung mechanisch abschwenkbar
5 Pin
7 Shielding
8 Sleeve
9 Nut
10 Bolts
1 Bolts
2 Shielding
3 Screw
4 Ball neck
5 Pin
6 Nuts
7 Shielding
8 Sleeve
9 Nut
10 Bolts
| Remove
|
|
|
1
| Remove trailer coupling boot
|
| AR31.10-P-0003T
|
2
| Remove screws (1)
|
|
|
3
| Remove the shield (2)
| Used component is deleted.
|
|
4
| Remove bolt (3)
|
|
|
5
| Clean the contact surface for the ball neck (4)
|
|
|
| Install
|
|
|
6
| Screw the nuts (6) onto the studs (5)
|
|
|
7
| Lock nuts (6)
|
|
|
8
| Screw in the stud (5)
| Screw the side of the stud (5) coated with thread lock into the threaded socket.
|
|
|
|
| Shield stud on trailer coupling
| *BA31.10-P-1002-02A
|
9
| Remove nuts (6)
|
|
|
10
| Install shield (7)
| Install new part.
|
|
11
| Put on sleeve (8)
|
|
|
12
| Screw in nut (9)
| Start the bolts (10) before tightening.
|
|
|
|
| Nut, shield to trailer coupling
| *BA31.10-P-1003-02A
|
13
| Screw in screws (10)
| Bolt, shield to trailer coupling
| *BA31.10-P-1004-02A
|
14
| Install boot on trailer coupling
|
| AR31.10-P-0003T
|
Number
| Designation
| Type 211.0/2
|
|
|
|
|
|
|
|
|
|
|
|
|
BA31.10-P-1002-02A
| Stud, shield to trailer coupling
|
| Nm
| 6
|
BA31.10-P-1003-02A
| Nut, shield to trailer coupling
|
| Nm
| 6
|
BA31.10-P-1004-02A
| Bolt, shield to trailer coupling
|
| Nm
| 5
|
Referenced documents
- ar3110p0003t Boot for mechanical swing-away trailer hitch, removal and installation
