Remove, install coupling jaw cross member

Type ar · topic 31.00 · version 0104 · 2001-01-19

Applies to: MODEL 670 with ENGINE 904.904 MODEL 668, 670 with ENGINE 904.908 /914 /923 /936

Where it sits

Function group 2 Chassis › 31 Frame, trailer operation › 31.00 General — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

EinPAS 35 Body/frame/detachable parts › 35.21 Frame › 35.21.40 Carrier/mounting bracket/reinforcement — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

EinPAS 35 Body/frame/detachable parts › 35.60 Trailer hitch › 35.60.30 Trailer hitch/trailer coupling — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

AR31.00-D-1000D

Remove, install coupling jaw cross member

4.7.96

MODEL 670 with ENGINE 904.904

MODEL 668, 670 with ENGINE 904.908 /914 /923 /936

D31.00-0001-11

1 Coupling jaw cross member

2 Bolt

3 Nut

4 Wiring harness

 	Removing, installing
1	Remove front bumper
2	Unscrew screws (2)	 Couterhold nuts (3).
			*BA31.00-N-1002-01A
3	Disconnect cable straps at coupling jaw crossmember (1) and expose wiring harness (4)	Installation: install new wiring harness (4) with new cable straps at coupling jaw crossmember (1).
4	Remove coupling jaw crossmember (1) from the front
5	Install in the reverse order

General information regarding frame, trailer operation

Number	Designation		Model 668, 670


BA31.00-N-1002-01A	Coupling jaw crossmember to frame	Nm	111