AR30.35-W-1100CA | Remove/install foot throttle actuator | 4.12.07 |
ENGINES 457.9 in MODEL 375.4 with BODY 375.860
ENGINES 457.9 in MODEL 374.6, 940, 942, 943, 944 with BODY 944.890
ENGINES 457.9 in MODEL 958 with BODY 958.880
W30.35-1191-08
Shown on body 944.890
1 Trim
2 Footwell trim on driver-side
X13 Diagnostic socket
Foot throttle actuator shows new design
3 Electrical connector
4 Bolts
B1 Foot throttle actuator
Foot throttle actuator shows previous design
3 Electrical connector
4 Bolts
B1 Foot throttle actuator
Modification notes
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove the paneling in driver side footwell (2) around the steering column | ||
3 | Remove paneling (1) | For previous version of foot throttle actuator (B1) only. | |
4 | Remove foot throttle actuator (B1) | | |
5.1 | Disconnect electrical connector (3) of the foot throttle actuator (B1) at the multipoint connector | Foot throttle actuator (B1), previous design | |
5.2 | Disconnect electrical connector (3) from foot throttle actuator (B1) | Foot throttle actuator (B1), new design | |
6 | Install in the reverse order | ||
7 | Teach in foot throttle actuator (B1) using STAR DIAGNOSIS | Only when replacing previous version of foot throttle actuator (B1). | |
8 | Read out fault memory in the drive control, control unit with STAR DIAGNOSIS and delete faults if necessary |
Accelerator pedal