AR30.35-W-1100C | Remove/install foot throttle actuator | 4.12.07 |
ENGINES 457.9 in MODEL 375.4 with BODY 375.840
ENGINES 457.9 in MODEL 944 with BODY 944.899
W30.35-1110-11
1 Footwell trim on driver-side
2 Cap
3 Union nut
X13 Diagnostic socket
W30.35-1111-01
4 Electrical connector
5 Bolts
B1 Foot throttle actuator
Modification notes
| Remove/install | ||
1 | Switch off ignition | ||
2 | Unscrew union nut (3) from diagnostic socket (X13) and remove cap (2) | ||
3 | Remove the paneling in driver side footwell (1) around the steering column | Installation: Slide bottom edge of footwell trim on driver-side (1) into bracket on floor panel. Pay attention to the position of the lug at the diagnostic socket. | |
4 | Disconnect electrical connector (4) of the foot throttle actuator (B1) at the multipoint connector | ||
5 | Unscrew bolts (5) and remove foot throttle actuator (B1) | | |
6 | Install in the reverse order | ||
7 | Teach in foot throttle actuator (B1) using STAR DIAGNOSIS | Only if foot throttle actuator (B1) has been replaced. | |
8 | Read out fault memory in the drive control, control unit with STAR DIAGNOSIS and delete faults if necessary |
Accelerator pedal