ar3035b1102tca

Remove/install drive control FR (FMR) control unit

Type ar · topic 30.35 · version 0200 · 2016-02-12

Applies to: Vehicle 958.4 with Cumbustion engine 457.9

Where it sits

Function group 1 Engine › 30 Throttle control, speed control systems › 30.35 Vehicle motor governor (FMR) — Series 958 (models 4**)

EinPAS 15 Engine › 15.45 Engine management › 15.45.11 Control unit/relay — Series 958 (models 4**)

Also applies to engines/gearboxes: 457 9**

AR30.35-B-1102TCA

Remove/install drive control FR (FMR) control unit

12.02.16

Vehicle 958.4 with Cumbustion engine 457.9

Remove/install drive control FR (FMR) control unit

W30.35-1085-11

1 Electric connections

A3 vehicle drive control unit (FR)

Nota de modificação

15.05.07

Reviewed work sequence.

Remove

1

Connect the Star Diagnosis

2

Save the parameters of the vehicle drive control unit (FR) (A3)

Only if the vehicle drive control units replaced (FR) (A3).

AR30.35-B-1102-01TA

3

Remove the upper coating of the instruments cluster at the passenger side

AR68.10-B-3435TA

4

Unfasten the electric connections (1) from the vehicle drive control unit (FR) (A3)

5

Remove the vehicle command control unit (FR) (A3)

For this, press the vehicle drive control unit (FR) (A3) at its rear fastening and unhook it from the top of the front fastening .

Install

6

Install the vehicle drive control unit (FR) (A3)

7

Connect the electric connections (1) to the vehicle drive control unit (FR) (A3)

8

Install the instruments cluster upper coating at the passenger side

AR68.10-B-3435TA

9

Transfer the parameters and teach-in the vehicle drive control unit (FR) (A3)

Only if the vehicle drive control units replaced (FR) (A3).

AR30.35-B-1102-01TA

10

Read the faults memory and erase it with the Star Diagnosis

11

Turn off ignition

12

Remove the Star Diagnosis

Referenced documents