ar3030w100102a

Replace retaining clip on the radar sensor

Type ar · topic 30.30 · version 0100 · 2008-07-29

Applies to: MODEL 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954 with CODE (ET5) Autonomous intelligent cruise control

Where it sits

Function group 1 Engine › 30 Throttle control, speed control systems › 30.30 Tempomat (TPM), DISTRONIC (DTR), Active Brake Assist — Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 · Series 952 · Series 953 · Series 954

EinPAS 28 Convenience system/driver assistance system › 28.26 Distance control › 28.26.12 Sensor/switch/wiring harness — Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 · Series 952 · Series 953 · Series 954

AR30.30-W-1001-02A

Replace retaining clip on the radar sensor

Replace retaining clip on the radar sensor

W30.30-1072-11

1 Press radar sensor (B93) using a suitable tool against the holder (3) until the spherical-head screws (1) unclip out of the clip.

Do not damage the radar sensor (B93).

2 Unscrew all spherical-head screws (1).

Replace retaining clip on the radar sensor

W30.30-1073-11

3 Press out all clips (2) using a suitable tool.

Replace retaining clip on the radar sensor

W30.30-1074-11

4 Insert new clip (2) in the mounting hole (4) on the radar sensor.

Ensure catch (arrows).

Replace retaining clip on the radar sensor

W30.30-1076-11

5 Lay radar sensor on the holder (3) and screw in all three spherical-head screws (1) on the holder (3) by about 3 to 4 threads.

6 Lay a suitable tool (5) between the radar sensor and holder (3).

Replace retaining clip on the radar sensor

W30.30-1077-11

7 Screw in all spherical-head screws (1) until the ball heads engage in the clip.

8 Remove underlaid tool (5).