ar3020p2000mcc

Remove//Install electronic accelerator

Type ar · topic 30.20 · version 0102 · 2008-11-18

Applies to: MODEL 451.3## /4## 1# with CODE (LHD) Left-hand drive vehicle

Where it sits

Function group 1 Engine › 30 Throttle control, speed control systems › 30.20 Electronic accelerator (EA)/cruise control (CC)/idle speed control (ISC) — Series 451 (models 3**, 4**)

EinPAS 15 Engine › 15.45 Engine management › 15.45.35 Throttle control — Series 451 (models 3**, 4**)

AR30.20-P-2000MCC

Remove//Install electronic accelerator

30.11.06

MODEL 451.3## /4## 1# with CODE (LHD) Left-hand drive vehicle

Remove//Install electronic accelerator

P30.20-2125-07

1 Plastic nuts

B37 Accelerator pedal sensor

2 Electrical connector

Remove/install

1

Adjust driver's seat to the rear

2

Unscrew plastic nuts (1) on accelerator pedal sensor (B37)

3

Lay accelerator pedal sensor (B37) to one side until electrical connector (2) is accessible

4

Separate electrical connector (2) at accelerator pedal sensor (B37)

5

Install in the reverse order

6

Check function of the accelerator pedal sensor (B37) and delete fault memory if necessary

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04MCC

Referenced documents