W30.16-0005-12
1 Full throttle stop bolt M865
2 Lock nut
3 Stop
4,6 Lock nuts
5 Connecting linkage
7 Lever
8 Electronic foot throttle sensor
A Dimension, approx. 1 mm
| Setting | ||
1 | Take off rubber cover at full throttle stop bolt (1) | ||
2 | Slacken lock nut (2) | ||
3 | Depress accelerator pedal as far as the mechanical stop of the full throttle stop bolt | ||
4 | Sett full throttle stop bolt (1) | Play (dimension A, approx. 1 mm) should exist between lever (7) and mechanical stop (3). | |
Slacken lock nuts (4, 6) if necessary and additionally set the connecting linkage (5). | |||
If the play cannot be set, check whether the correct full throttle stop bolt (1, M865) is installed. | |||
5 | Tighten lock nuts (2, 4, 6) | ||
6 | Fit rubber cover onto full throttle stop bolt (1) |