ar2910y0300a

Remove/install pedal assembly

Type ar · topic 29.10 · version 0102 · 2019-10-30

Applies to: Model 831.247

Where it sits

Function group 2 Chassis › 29 Pedal assembly › 29.10 Pedals, bearing bracket — Series 831 (models 247)

EinPAS 37 Interior equipment › 37.50 Pedal assembly › 37.50.40 Pedal bracket/pedal support — Series 831 (models 247)

AR29.10-Y-0300A

Remove/install pedal assembly

30.10.2019

Model

831.247

Remove/install pedal assembly

Accelerator pedal removal and refitment procedure

6	Accelerator pedal sensor connector
7	Accelerator pedal unit
8	Accelerator pedal unit bracket

Y29.10-0001-06

 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
 	Remove/install
1	Switch off ignition.	 Secure the vehicle to prevent it from rolling.
2	Disconnect accelerator pedal sensor connector (6) from the pedal unit.
3	Remove the accelerator pedal unit (7) from the bracket.	 Accelerator pedal unit to bracket install	*BA29.10-Y-1002-01A
4	Remove the accelerator pedal unit bracket (8) from the front frame.	 Accelerator pedal unit bracket to frame install	*BA29.10-Y-1001-01A
5	Install in the reverse order.

 Pedal Assembly Remove/install

Number	Designation		Model 831.247
BA29.10-Y-1001-01A	Accelerator pedal unit bracket to frame install	Nm	201.6

 Pedal Assembly Remove/install

Number	Designation		Model 831.247
BA29.10-Y-1002-01A	Accelerator pedal unit to bracket install	Nm	201.6

Referenced documents

as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.