ar2860p1007b

Remove/install gearshift lever

Type ar · topic 28.60 · version 0103 · 2010-03-11

Applies to: MODEL 463 with TRANSFER CASES 750.650 /651 /652 /653

Where it sits

Function group 2 Chassis › 28 Transfer case › 28.60 Gearshift — Series 463

EinPAS 17 Drivetrain/axle › 17.22 Transfer case › 17.22.38 Gearshift system/switch cylinder/shift piston — Series 463

Also applies to engines/gearboxes: 750 650, 750 651, 750 652, 750 653

AR28.60-P-1007B

Remove/install gearshift lever

10.3.10

MODEL 463 with TRANSFER CASES 750.650 /651 /652 /653

Remove/install gearshift lever
Remove/install gearshift lever

P28.60-2007-01

1 Gearshift lever

2 Boot

3 Lock nut

P28.60-2005-01

Remove/install gearshift lever

P28.60-2006-01

4 Shift rod

5 Rubber boots

Remove/Install

1

Pull up boot (2)

2

Undo locknut (3) and remove gearshift lever (1)

Installation: Check rubber boot (5) is installed correctly and lubricate guide slightly at shift rod (4).
The marking on shift position "S" must point to the rear on the gearshift lever.

Lubricant

*BR00.45-Z-1002-06A

3

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60