The installation of a planetary gear is described below. The installation of other planetary gears is carried out in the same manner.
1 | Insert needle rollers (4), 28 pieces in each case, into the planetary gear (3) using the assembly mandrel (9). |
Needle rollers (4) and planetary gear (3) may only be replaced in complete sets. |
W26.50-1040-01
2 | Insert thrust plates (5) for needle rollers (4) into planetary gear (3) and grease. |
The assembly mandrel (9) remains installed. |
W28.50-1110-01
3 | Insert planetary gear (3) with thrust plates (5) and align in such a way that the installed assembly mandrel (9) is flush with the bores. |
W28.50-1111-01
4 | Install the planetary gear shaft (1) so that the oil hole (B) and countersink for the grub screw (A) point outwards and align the countersink for grub screw (A) with the threaded hole (arrow). |
The assembly mandrel (9) is pressed out in the process. |
W28.50-1112-01
5 | Screw in grub screw (2) for securing planetary gear shaft (1) and caulk (arrows). |
W26.50-0045-01
Referenced documents
- wf5850n265010a Assembly mandrel for planetary gear in transfer case