Transfer case gear set, shafts
Número | Denominação | Transfer case 750.61 | |||
BE28.50-B-1008-01A | Rear main shaft axial play | mm | 0,06 - 0,10 | ||
BE28.50-B-1012-01A | Compensating washers for the adjustment of the rear main shaft axial play | mm | 0,05 / 0,10 / 0,20 / 0,40 / 0,80 | ||
000 589 59 63 00
343 589 00 40 00
001 589 53 21 00
B28.10-0008-01
In order to start the adjustment, the front cover must be duly installed.
1 With the help of the fastening shims (1), position the outer race (2) of the rear main shaft bearing without any clearance or pre-load.
B28.10-0009-01
2 With the help of the support (3) and dial gauge (4), measure the distance between the housing face (5) and the bearing race (2).
3 Put in the cover recess the spacer ring and some compensating washers.
4 Put a new sealing joint on the rear cover.
B28.10-0010-01
When tightened, a new sealing joint has a 0.05 mm size reduction due to the compression. During the assembly, take into consideration this value.
5 With the dial gauge (4) and the support (3) measure the distance between the joint's face (6) and the bearing contact surface (7).
Confirm the obtainment of the proper dimension, which is an amount higher than the flange of the bearing external race. Select the compensating shims in such a way that you obtain the prescribed axial play.