ar2818p0010gl

Remove/install differential lock vacuum reservoir

Type ar · topic 28.18 · version 0105 · 2012-12-07

Applies to: MODEL 461

Where it sits

Function group 2 Chassis › 28 Transfer case › 28.18 Transmission - pneumatic system — Series 461

EinPAS 17 Drivetrain/axle › 17.22 Transfer case › 17.22.32 Oil pump/oil duct/oil filter/oil cooling — Series 461

AR28.18-P-0010GL

Remove/install differential lock vacuum reservoir

6.12.12

MODEL

461

Remove/install differential lock vacuum reservoir

1

Screw

2

Vacuum line

3

Differential lock vacuum reservoir

P28.18-2004-06

Remove/install

1

Remove left headlamp trim

AR88.00-P-2100G

2

Remove left fender liner in front fender

3

Detach vacuum line (2) from differential lock vacuum reservoir (3).


When doing so, do not kink vacuum line (2).
Operation of the differential locks can otherwise be impaired.

4

Remove differential lock vacuum reservoir (3).

To do this, remove bolts (1) at fender from outside.

5

Install in the reverse order

Check

6

Carry out function check of differential lock

Referenced documents