ar2760p092001a

Removing and installing selector lever handle

Type ar · topic 27.60 · version 0113 · 2009-09-24

Applies to: TRANSMISSION 722.6 in MODEL 129, 140, 163, 170, 202, 208, 210, 215, 220 TRANSMISSION 722.5 in MODEL 210 TRANSMISSION 722.3 in MODEL 461, 463 TRANSMISSION 722.6 in MODEL 461, 463

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.60 Gearshift, control — Series 129 · Series 140 · Series 163 · Series 170 · Series 202 · Series 208 · Series 210 · Series 215 · Series 220 · Series 461 · Series 463

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.30 Shift module/gearshift lever/shift rod/shift cable — Series 129 · Series 140 · Series 163 · Series 170 · Series 202 · Series 208 · Series 210 · Series 215 · Series 220 · Series 461 · Series 463

Also applies to engines/gearboxes: 722 3**, 722 5**, 722 6**

AR27.60-P-0920-01A

Removing and installing selector lever handle

Removing and installing selector lever handle

P27.60-0220-02

Remove

1 Loosen clamp (3) by turning anticlockwise (arrow A).

2 Pull selector lever handle (1) off selector lever (4).

Install

3 Push selector lever handle (1) onto the selector lever (4) and tighten the clamping piece (3) in clockwise direction (arrow B).