AR27.55-S-0600A | Remove/install oil lines of oil cooling for automatic transmission | 12.1.10 |
ENGINES 104.900 in MODEL 638.2
S27.55-2500-09
1 Starter
2 Banjo bolt, feed
3 Banjo bolt, return
4 Connector, feed oil pressure hose
5 Connector, return oil pressure hose
10 Mounting clamp to oil pan
11 Oil line, feed
12 Return flow oil line
13 Sealing ring
6 Screw
7 Mounting clamp to transmission
8 Bolt with nut
9 Fixing to power steering oil line
| Remove/install | ||
1 | Remove starter (1) | ||
| Risk of damage due to dirt effects in transmission. Use lint-free rags. | ||
2 | Unscrew banjo bolts (2, 3) | Oil runs out. Installation: Install new sealing rings (13). | |
| |||
| |||
3 | Unscrew connectors for oil pressure hoses (4, 5) on oil lines (11, 12) | Installation: Do not mix up oil pressure hose (4, 5) Oil runs out. | |
| |||
| |||
4 | Unscrew bolt (6) mounting clamps (7) oil lines (11, 12) on transmission | | |
5 | Unscrew bolt with nut (8) at fixing of power steering oil line (9) | | |
6 | Unscrew bolts (6) of mounting clamps to oil pan (10) | | |
7 | Remove oil lines (11, 12) | Oil runs out. Remove oil lines (11, 12) downwards. | |
8 | Install in the reverse order | ||
| Checking | ||
9 | Erase fault memory using the HHT |
Transmission oil cooling, oil pump
Number | Designation | Model Series | |
BA27.55-N-1003-01A | Bolt, oil line mounting clamp to oil pan (engine) | Nm | 8 |
BA27.55-N-1004-01A | Bolt, oil line fixing clamp to transmission | Nm | 8 |
BA27.55-N-1005-01A | Banjo bolt, oil feed line to transmission | Nm | 25 |
BA27.55-N-1006-01A | Banjo bolt, oil return line to transmission | Nm | 25 |
BA27.55-N-1008-01A | Union nut, oil pressure hose to | Nm | 25 |
BA27.55-N-1010-01A | Union nut, oil pressure hose to | Nm | 25 |
Referenced documents
- ad0000s200003a Connecting Hand-Held Tester (HHT), reading fault memory
- ar1530s7100b Remove/install starter