ar2750s062002e
Removing and installing output flange
Type ar · topic 27.50 · version 0102 · 2016-02-18
Applies to: Model 447 with engine 651 with transmission 722.9 Model 447, 448 with engine 274 with transmission 722.9
Where it sits
Function group 2 Chassis › 27 Automatic transmission › 27.50 Gear assembly — Series 447 · Series 448 · Series 651
EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.41 Flange — Series 447 · Series 448 · Series 651
Also applies to engines/gearboxes: 274 ***, 722 9**
AR27.50-S-0620-02E
| Removing and installing output flange
|
|
|
Model
| 447 with engine 651 with transmission 722.9
|
Model
| 447, 448 with engine 274 with transmission 722.9
|
Number
| Designation
|
| Transmission 722.9
|
BA27.50-N-1001-01C
| Collar nut, output flange to output shaft
| Nm
| 200
|
Remove
1
| Unscrew collar nut (1) using socket.
|
|
| While doing so, counterhold output flange (2) using key wrench.
|
2
| Pull output flange (2) off the output shaft.
|
|
| For seized output flange (2),
|
|
|
|
|
| Use puller.
|
3
| Check output flange (2) for damage, replace as per findings.
|
Install
4
| Push output flange (2) onto output shaft.
|
5
| Screw on collar nut (1) using socket .
|
|
| Install new collar nut (1).
While doing so, counterhold output flange (2) using key wrench.
|
6
| Secure collar nut (1) using drift .
|
|
| Secure collar nut (1) crosswise at cutouts on output shaft.
|
