Series
en
ar2750d072001a
Disassemble/assemble oil pump
Type ar · topic 27.50 · version 0105 · 2014-01-21
Applies to: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 TRANSMISSION 722.683 in MODEL 906.1/2/6/7 TRANSMISSION 722.684 in MODEL 906.1/2/6/7 TRANSMISSION 722.685 in MODEL 906.1/2/6/7 TRANSMISSION 722.686 in MODEL 906.1/2/6/7
Where it sits
Function group 2 Chassis › 27 Automatic transmission › 27.50 Gear assembly — Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**) · Series 906 (models 1**, 2**, 6**, 7**)
EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.31 Oil pump/oil duct/oil filter/oil cooling — Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**) · Series 906 (models 1**, 2**, 6**, 7**)
Also applies to engines/gearboxes: 722 681, 722 683, 722 684, 722 685, 722 686
AR27.50-D-0720-01A
Disassemble/assemble oil pump
Automatic transmission fluids (ATF, Sheet 236.10)
TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6
BB00.40-P-0236-10A
Automatic transmission fluids (ATF, Sheet 236.12)
TRANSMISSION 722.683/684/685/686 in MODEL 906.1/2/6/7
BB00.40-P-0236-12A
TRANSMISSION
722.681 in MODEL 902.6, 903.6, 904.6, 905.6
TRANSMISSION
722.683 in MODEL 906.1/2/6/7
TRANSMISSION
722.684 in MODEL 906.1/2/6/7
TRANSMISSION
722.685 in MODEL 906.1/2/6/7
TRANSMISSION
722.686 in MODEL 906.1/2/6/7
1
Remove impellers (1, 2).
2
Install a new radial shaft sealing ring (3).
4
Install impellers (1, 2).
Installation: Lubricate impellers with automatic transmission fluid. The chamfer (arrow) on the impeller (1) must face towards the pump housing.
Referenced documents
