ar2750d062002a
Removing and installing output flange
Type ar · topic 27.50 · version 0111 · 2016-02-09
Applies to: Transmission 722.681 in model 902.6, 903.6, 904.6, 905.6 Transmission 722.683/684/685 in model 906 except code ZG1 (Engageable all-wheel drive) except code ZG3 (Engageable all-wheel drive with gear reduction) Transmission 722.686 in model 906 except code ZG1 (Engageable all-wheel drive) except code ZG3 (Engageable all-wheel drive with gear reduction)
Where it sits
Function group 2 Chassis › 27 Automatic transmission › 27.50 Gear assembly — Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**) · Series 906
EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.41 Flange — Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**) · Series 906
Also applies to engines/gearboxes: 722 681, 722 683, 722 684, 722 685, 722 686
AR27.50-D-0620-02A
| Removing and installing output flange
|
|
|
Transmission
| 722.681 in model 902.6, 903.6, 904.6, 905.6
|
Transmission
| 722.683/684/685 in model 906
|
|
| except code ZG1 (Engageable all-wheel drive)
|
|
| except code ZG3 (Engageable all-wheel drive with gear reduction)
|
Transmission
| 722.686 in model 906
|
|
| except code ZG1 (Engageable all-wheel drive)
|
|
| except code ZG3 (Engageable all-wheel drive with gear reduction)
|
Number
| Designation
|
| Transmission 722.681
| TRANSMISSION 722.683/684/685/ 686
|
BA27.50-N-1001-01A
| Collar nut, output flange to output shaft
| Nm
| 200
| 200
|
Remove output flange
1
| Counterhold output flange (2) using pin wrench and unscrew collar nut (1) using socket wrench bit.
|
2
| Remove output flange (2) using puller.
|
Install output flange
3
| Push output flange (2) onto main shaft.
|
4
| Counterhold output flange (2) using pin wrench and screw on collar nut (1) tightly using socket wrench bit .
|
|
| Install new collar nut (1).
|
5
| Secure collar nut (1) using drift (arrow).
|
