Removing and installing the programme selector switch

Type ar · topic 27.19 · version 0103 · 1999-05-31

Applies to: ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.19 Transmission - electrical system — Series 601 (models 970) · Series 638

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.12 Sensor/switch/wiring harness — Series 601 (models 970) · Series 638

Also applies to engines/gearboxes: 111 948, 111 978

AR27.19-S-0500A

Removing and installing the programme selector switch

29.11.95

ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

S27.19-2000-11

1 Lining

S4 Programme selector switch

S4.1 Plug-in connection

 	Removing and installing
1	Disconnect the ignition
2	Remove the central lining (1) from the dashboard		AR68.10-S-3430A
3	Disconnect the plug-in connection (S4.1) and unhook the programme selector switch (S4)	 Installation: The programme selector switch (S4) must be heard to fit in
4	Installation in reverse order