ar2719s0400a

Removing and installing the pedal position sensor

Type ar · topic 27.19 · version 0103 · 1999-05-31

Applies to: ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.19 Transmission - electrical system — Series 601 (models 970) · Series 638

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 601 (models 970) · Series 638

Also applies to engines/gearboxes: 111 948, 111 978

AR27.19-S-0400A

Removing and installing the pedal position sensor

29.11.95

ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

Removing and installing the pedal position sensor

S27.19-2002-06

1 Support

2 Lever

3 Safety ring

4 Control rod

5 Cup

6 Safety ring

B71 Pedal position sensor

B71.1 Pedal position sensor plug-in connection

Removing and installing

1

Remove the pedal position sensor (B71) together with the support (1)

Do not unhook the control rod (4)

2

Disconnect the pedal position sensor plug-in connection (B71.1)

3

Remove the safety ring (6) and unhook the cup (5) from the lever (2)

4

Unhook the control rod (4) from the support (1)

5

Remove the pedal position sensor (B71) from the support (1)

6

Remove the safety ring (3) and the lever (2) from the pedal position sensor (B71)

Installation: The retaining bolt (arrow) must fit into the lever bore (2).
Check the safety ring (3), replace if appropriate

7

Installation in reverse order

8

Adjust the control rod (4)

AR27.19-S-0420A

Referenced documents