Removing and installing inductive sensor (turbine speed) · ar2719b0900a · Mercedes-Benz WIS

AR27.19-B-0900A

Removing and installing inductive sensor (turbine speed)

12.02.16

Automatic transmission 721.936, 721.938, 721.939, 721.940

T27.19-0030-01

T27.19-0031-01

1 Plug

2 Cylindric plate

3 Connector

4 Torx screw

5 Inductive sensor

	Remove and install
1	Removing the oil pan		AR27.10-B-7030A
2	Unscrew the iron bolt (1) from the grooved plate (2)		*BA27.19-B-1005-02A
3	Separate the connector (3) from the inductive sensor (5)	With appropriate pliers, separate by the terminals and not by the connector's cable.
4	Remove the Torx bolt (4) and remove the inductive sensor (5)		*BA27.19-B-1004-02A
		Install: In the case of the inductive sensor's replacement, determine the thickness of the compensating washers: 
		Adjust the inductive sensor (turbine's rpm)	AR27.19-B-0900-01A
			*BE27.19-B-1002-01A
5	Install in the operations' reverse order

Transmission electrics

Número	Denominação		Gearbox 721.930/931/933, 721.934/936/938, 721.939/940


BE27.19-B-1002-01A	Adjustment of the turbine revolutions transmitter	mm	0,6...0,8

Transmission electrical system

Número	Denominação		Automatic transmission 721.930/931/933, 721.934


BA27.19-B-1004-02A	Turbine rotations transmitter	Nm	50
BA27.19-B-1005-02A	Plug in the hydraulic plate	Nm	100