Removing and installing inductive sensor (PTO speed) · ar2719b0800a · Mercedes-Benz WIS

AR27.19-B-0800A

Removing and installing inductive sensor (PTO speed)

12.02.16

Automatic transmission 721.936, 721.938, 721.939, 721.940

T27.19-0033-11

1 Hex nut

2 Washer

3 Cover

4 Sealing gasket

5 Inductive sensor (rpm output)

6 Fastening bolt

7 Electric connector

	Remove and install
1	Unfasten the hexagonal nuts (1) and remove the cap (3)	Install: Replace the sealing ring (4) and the hexagonal nuts (1).
			*BA27.30-B-1001-03A
2	Separate the electric connector (7) at the inductive sensor (5)	With appropriate pliers, separate by the terminals and not by the connector's cable.
3	Unscrew the fastening bolt (6) and remove the inductive sensor (5)
			*BA27.19-B-1003-02A
		Install: In the case of the inductive sensor's replacement, determine the thickness of the compensating washers  .
		Adjust the inductive sensor (power takeoff rpm output)	AR27.19-B-0800-01A
			*BE27.19-B-1001-01A
4	Install in the operations' reverse order

Transmission electrics

Número	Denominação		Gearbox 721.930/931/933, 721.934/936/938, 721.939/940


BE27.19-B-1001-01A	Adjustment of the revolutions transmitter	mm	0,5...0,7

Transmission electrical system

Cover

Número	Denominação		Gearboxes 721.930/931/933, 721.934/936/938, 721.939/940


BA27.30-B-1001-03A	Inductive transmitter cover fastening nut to gearbox	Nm	6