ar2718p1455g

Adjusting vacuum control on automatic transmission

Type ar · topic 27.18 · version 0100 · 1998-02-27

Applies to: TRANSMISSION 722.3 in MODEL 461, 463

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.18 Transmission - pneumatic system — Series 461 · Series 463

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.1 Basic information — Series 461 · Series 463

Also applies to engines/gearboxes: 722 3**

AR27.18-P-1455G

Adjusting vacuum control on automatic transmission

26.11.97

TRANSMISSION 722.3 in MODEL 461, 463

Adjusting vacuum control on automatic transmission

D27.18-0002-09

1 Nuts

2 Vacuum control valve

3 Lever

4 Pedal value sensor

Checking, adjusting

1

Check vacuum control

AR27.18-P-1200G

2

Loosen nuts (1) on vacuum control valve (2)

3

Move lever (3) of accelerator pedal sensor (4) to the wide open throttle position (arrow).

4

Turn the vacuum control valve (2) against the full load position stop (arrows) until resistance is detectable.

5

Tighten nuts (1) on vacuum control valve (2) in this position.

*BA27.18-P-1001-01A

Vacuum control valve

Number

Designation

Transmissions 722.331/372/380/
382/384/385/
396/397/398/399

BA27.18-P-1001-01A

Hexagon nuts, vacuum control valve to bracket

Nm

5

Referenced documents