ar2710d028005a

Removing and installing helical gear of centrifugal governor

Type ar · topic 27.10 · version 0104 · 1999-08-23

Applies to: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) Lieferumfang FedEx

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.10 Complete transmission — Series 601 (models 943) · Series 602 (models 980) · Series 901 (models 06*, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 312, 362, 4**, 462, 463) · Series 904 (models 0**, 4**)

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.34 Gearshift — Series 601 (models 943) · Series 602 (models 980) · Series 901 (models 06*, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 312, 362, 4**, 462, 463) · Series 904 (models 0**, 4**)

Also applies to engines/gearboxes: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.10-D-0280-05A

Removing and installing helical gear of centrifugal governor

000 589 52 37 00

Pliers

D27.10-0024-01

1 Remove snap ring (1)  and pull off helical gear (2).

D27.10-0025-01

2 Mount helical gear (2) on the new centrifugal governor (3) so that the driver pin (arrow) engages in the bore of the helical gear.

D27.10-0026-01

3 Install snap ring (1) .