ar2660w642001ca

Adjusting rear shift gate support and longitudinal support

Type ar · topic 26.60 · version 0101 · 2010-01-15

Applies to: TRANSMISSION 715.320 2#

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.60 Gearshift

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.30 Shift module/gearshift lever/shift rod/shift cable

Also applies to engines/gearboxes: 715 320

AR26.60-W-6420-01CA

Adjusting rear shift gate support and longitudinal support

Shift mechanism test and adjustment specifications

Number

Designation

Transmission
715.320
in model 970, 972,
974, 976 right-hand steering

BE26.60-N-1001-01D

Adjustment dimension "A" for shift gate support

mm

164

See picture

-

Shift mechanism

Number

Designation

Transmission
715.320/321

BA26.60-N-1003-01F

Lock nut, control valve to shift rod

Nm

150

BA26.60-N-1004-01F

Lock nut, shift gate support

Nm

55

Adjusting rear shift gate support and longitudinal support

W26.60-1028-11

1 Check adjustment dimension (A) at rear gate support (6); correct if necessary.

Adjust gate support:

2 Slacken jam nuts (5) at gate support (2) by a few turns.

3 Slacken jam nuts (4) at longitudinal support at control valve (3) by a few turns.

4 Turn adjusting rod (6) of gate support (2) until specified adjustment dimension (A) is reached.

5 Tighten jam nuts (4) of longitudinal support at control valve (3) .

6 Recheck adjustment dimension (A) at gate support (2).

7 Tighten jam nuts (5) at gate support (2) .