AR26.60-T-0010A | Remove/install shift forks and shift rails | 9.10.06 |
TRANSMISSION 714.669 in MODEL NMB671
T26.60-0003-06
1 Retainer
2 Reverse gear shift fork
3 1st/2nd gear shift fork
4 Shift fork, 3rd/4th gears
5 5th/6th gear shift fork
6 Reverse gear shift rail
7 1st/2nd gear shift rail
8 3rd/4th gear shift rail
9 5th/6th gear shift rail
10 Sliders
| Remove/install | ||
1 | Remove rear section of transmission housing | ||
2 | Pull out retainer (1) of reverse gear shift fork (2) | ||
3 | Remove shift forks for reverse gear (2), 1st/2nd gear (3) and 3rd/4th gear (4) | - Pull shift forks and shift rails slightly out of main shaft. - Unhook shift fork from shift rail and remove. - Pull sliders (10) out of shift forks (2, 3, | |
Installation: - ensure correct location of sliders in shift forks. - Lightly oil sliders. | |||
4 | Unhook shift rails (6, 7, 8, 9) and remove | Removal sequence: - Reverse gear shift rail (6) - 1st/2nd gear shift rail (7) - 3rd/4th gear shift rail (8) - 5th/6th gear shift rail (9) | |
5 | Pull out 5th/6th gears shift fork (5) | ||
6 | Install in the reverse order | Before installation, clean all parts and check them for damage and wear. Replace damaged or worn parts if necessary. |
Referenced documents
- ar2640t2475a Remove/install rear section of transmission housing