D26.60-0013-11
1 Protective cap
2 Lower section of shift lever
3 Cylindrical pin
| Removing | ||
1 | Remove shift lever | ||
2 | Remove protective cap (1) | ||
3 | Drive cylindrical pin (3) using a drift punch (8 mm dia.) | ||
4 | Remove lower section of shift lever (2) using impact extractor | Impact extractor | |
Threaded stud | |||
| Installing | ||
5 | Insert lower section of shift lever (2) | ||
6 | Drive in cylindrical pin (3) using a drift punch | There must be a distance of approx. 2.5 mm on both sides. | |
7 | Install protective cap (1) | Replace if damaged. | |
8 | Install shift lever |
116 589 20 33 00
Impact extractor
116 589 03 34 00
Threaded stud