Shift mechanism
Número | Denominação | Gearbox 718.463 | |||
BE26.60-B-1001-01B | Dimension (D) between the upper and bottom terminals of the selection stem set. | mm. | 489 | ||
BE26.60-B-1002-01B | Dimension (E) between the right and left terminal centers of the gearbox stem set. | mm. | 358 | ||
BE26.60-B-1003-01B | Correct position (H) between the telescopic support and the tapered pivot of the selection stem set. | Degrees | 90° | ||
BE26.60-B-1004-01B | Distance (G) between the rear end of the tube of the telescopic set and the front face of the support plate. | mm. | 48 | ||
BE26.60-B-1005-01B | Distance (F) between the telescopic support rear terminal center and the front face of the support plate. | mm. | 53 | ||
BE26.60-B-1006-01B | Distance (B) between the coupling bar front terminal center and the nut front face. | mm. | 38 | ||
BE26.60-B-1007-01B | Distance (C) between the rear end and the nut rear face. | mm. | 35 | ||
BE26.60-B-1008-01B | Length (A) of the coupling bar. | mm. | 202 | ||
B26.60-6663-01
Adjustments of the shifting bar (1)
Remark: The adjustments are to be carried out with shifting bar assembly (1) on the workbench.
01 - Slacken the adjusting nuts (2) and (3) and turn the rear and front terminals clockwise or counterclockwise until obtaining the specified values of measurements (B), (C) and (A).
Remark: For the correct positioning of the shifting lever and perfect selection of the gears (shifting map), it is necessary that the measurements (B), (C) a (A) be within the specified values.
After carrying out the adjustments, tighten the nuts (1) and (2) and install the shifting bar (1) on the vehicle.
B26.60-6665-01
Adjustment of the Selection Tie-Rod Assembly (4)
01 - Loosen the nuts (5) and (6).
02 - Turn the rod (4) clockwise or counterclockwise until obtaining the specified value for measurement (D).
03 - Tighten the nuts (5) and (6).
Adjustment of the gearbox tie-rod assembly (7)
01 - Loosen the nuts (8) and (9).
02 - Turn the rod (7) clockwise or counterclockwise until obtaining the specified value for measurement (E).
03 - Tighten the nuts (8) and (9).
B26.60-6664-01
Adjustment of the telescopic support assembly (15)
01 - Loosen the nut and lift off the terminal (11) from its housing.
02 - Loosen the nut (12) and turn the terminal (11) clockwise or counterclockwise until obtaining the specified value for measurement (F).
03 - Tighten the nut (12) and install the terminal (11) in its housing.
04 - Loosen the nut (13) and turn the bolt (14) clockwise or counterclockwise until obtaining the specified value for measurement (G).
05 - Tighten the nut (13).