AR26.60-B-0010F | Remove/install shift forks and shift rails | 12.02.16 |
Manual transmission 713.74 with Vehicle 384.0, 384.114, 386, 694.0
Manual transmission 715.021 with Vehicle 682
B26.60-6690-09
1 Screw
2 Control rod support
3 Guide bushing
4 Actuation forks support
5 Control rod of 5th/6th gear
6 Actuation rod of 5th/6th gear
7,10 Elastic pin
8 Stud
9 Drag piece of 3rd/4th gear
11 Control rod of 3rd/4th gear
12 Control rod of 1st/2nd gear
13 Control rod of reverse gear
14 Actuation fork of 3rd/4th gear
15 Actuation fork of 1st/2nd gear
16 Drag piece of 1st/2nd gear
17 Drag piece of the reverse gear
18 Actuation fork of reverse gear
| Remove | ||
1 | Loosen and remove the bolts (1) together with their respective washers | Installing:Mark the position of the bolts to facilitate the assembly. | |
| |||
2 | Remove the set of control rods (2) from the main cover | ||
3 | Remove the support of the actuation forks (4), the 5th/6th gear control rod (5) and the 5th/6th gear actuation fork (6) | ||
4 | Remove the elastic pin (7) and separate the 5th/6th gear actuation fork (6) from the 5th/6th gear control rod (5) | ||
5 | Loosen the stud (8) and remove the 3rd/4th gear control rod (11) in the direction of the arrow, next removing the actuation fork of the 3rd/4th gear (14) | Installing: Replace the pins (if with micro-encapsulated thread) or apply chemical lock. | |
| |||
6 | Remove the drag piece of the 3rd/4th gear (9) from the end of the 3rd/4th gear control rod (11) to do so, lift-off the elastic pin (10) | Utilize an appropriate drift. | |
7 | Loosen the stud (8) and remove the 1st/2nd gear control rod (12) in the direction of the arrow, next removing the actuation fork of the 1st/2nd gear (15) | Installing: Replace the pins (if with micro-encapsulated thread) or apply chemical lock. | |
| |||
8 | Remove the drag piece of the 1st/2nd gear (16) from the end of the 1st/2nd gear control rod (12) to do so, lift-off the elastic pin (10) | ||
9 | Loosen the stud (8) and remove the control rod of the reverse gear (13) in the direction of the arrow remove the control fork of the reverse gear (18) | Installing: Replace the pins (if with micro-encapsulated thread) or apply chemical lock. | |
| |||
10 | Remove the reverse gear drag piece (17) from the end of the reverse gear control rod (13) to do so, lift off the elastic pin (10) | ||
11 | Remove the guide bushings (3) from the control rod (4) | Utilize an appropriate drift. | |
12 | Install in reverse order |
Splitter group
Número | Denominação | Gearbox 713.74, 715.021 | |||
BA26.35-B-1001-01F | Coupling forks support set on the cover | Nm | 25 | ||
BA26.35-B-1002-01F | Threaded pin | Nm | 15 | ||
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1008-01A | Auto Lock | Loctite 271 |