Remove/install shift forks and shift rails · ar2660b0010bd · Mercedes-Benz WIS

AR26.60-B-0010BD

Remove/install shift forks and shift rails

12.02.16

Manual transmission 714.183 with Vehicle 634.0

B26.60-6686-06

1 Lock

2 Reverse gear command selection fork

3 Command selection fork, gears 1 and 2

4 Command selection fork, gears 3 and 2 steady

5 Selection fork of the multiplying group

6 Reverse gear command rod

7 Command rod, gears 1 and 2

8 Command rod, gears 3 and 2 steady

9 Sliding shoes

	Remove and install
1	Remove rear part of gearbox		AR26.40-B-2475BG
2	Remove gear command		AR26.60-B-0001BP
3	Remove oil tube	Install: Verify oil tube as to damages and replace if necessary. Observe mounting position.
4	Remove lock (1) from reverse gear command rod
5	Disengage reverse gear command rod (6) from gears 1 and 2 (7), and gears 3 and 2 steady (8) and remove in a sequence	 During this process slightly incline secondary shaft sideways.
6	Remove reverse gear (2) selection fork, from gears 1 and 2 (3), and gears 3 and 2 steady (4) and the multiplying group (5)
7	Remove sliding shoes from selection forks pins (10)	Install: Be sure the sliding shoes (10) are correctly settled on the selection forks. Slightly oil the sliding shoes (10).
			*BA26.60-B-1005-01L
8	Clean all parts, check for damages and worn out parts and replace them if necessary
9	Install in reverse order

Shift mechanism