Remove/install shift forks and shift rails · ar2660b0010b · Mercedes-Benz WIS

AR26.60-B-0010B

Remove/install shift forks and shift rails

12.02.16

Manual transmission 715.564

B26.60-6678-09

1 Drive selector fork

2 Drive selector fork

3 Drive selector fork

4 Rail section

5 Locking ring

6 Sliding inserts

7 Sliding inserts

8 Linkage pins

9 Locking ring

10 Shaped drive rod

11 Shaped drive rod

12 Shaped drive rod

13 Safety clip

14 Drive selector fork

15 Guide plate

	Remove and install
1	Remove the gearbox central part.		AR26.40-B-2475C
2	Remove the safety clips (13).	Install: The safety clips (13) should be firmly fastened. The shaped drive rod (10) is not fastened by safety clips.
3	Remove the drive selector forks (1), (2) and (3) together with the sliding inserts (6) and (7) and the shaped drive rods (10), (11) e (12).	Install: The safety rods (10) and (11) should fit at the wider entrances; the shaped drive rod (8) should fit at the guide plate (15) narrower entrances.
4	Remove the locking rings (5) and the rail section (4) from both sides.
5	Remove the locking rings (9), the linkage pin (8) from both sides and separate the governor fork (2) and (3).
6	Remove the reverse gear and the drive selector fork (14).	 Use a three-claw universal extractor.
7	Install in reverse order.