ar2660b0010a

Remove/install shift forks and shift rails

Type ar · topic 26.60 · version 0200 · 2016-02-12

Applies to: Manual transmission 715.504 with CODE GS1 (Manual gearshift) with CODE GS2 (Gear control) with CODE GS3 (Hydraulic gearshift)

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.60 Gearshift

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.34 Gearshift

Also applies to engines/gearboxes: 715 504

AR26.60-B-0010A

Remove/install shift forks and shift rails

12.02.16

Manual transmission 715.504 with CODE GS1 (Manual gearshift) with CODE GS2 (Gear control) with CODE GS3 (Hydraulic gearshift)

Remove/install shift forks and shift rails

W26.60-0007-06

1 Drive selector fork

2 Sliding inserts

3 Drive selector fork

4 Safety clip

5 Drive selector fork

6 Shaped drive rod

7 Shaped drive rod

8 Shaped drive rod

9 Guide plate

Remove and install

1

Remove the gearbox central part

AR26.40-B-2475C

2

Remove the safety clips (4)

Install: The safety clips should be firmly fastened. The shaped drive rod (6) is not fastened by safety clips.

3

Remove the drive selector forks (3) and (5) together with the sliding inserts (2) and the shaped drive rods (6), (7) e (8)

Install: The safety rods (6) and (7) should fit at the wider entrances; the shaped drive rod (8) should fit at the guide plate (9) narrower entrances.

4

Remove the reverse gear and the drive selector fork (1)

5

Install in reverse order.

Referenced documents