ar2650g042012e

Checking wear limit between synchronizer cone and sliding sleeve

Type ar · topic 26.50 · version 0100 · 2008-04-28

Applies to: TRANSMISSION 715.350 /351 /361 in MODEL 000.001

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.50 Gear assembly, shafts, differential — Series 000 (models 001)

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.50 Shaft/gear/synchronization — Series 000 (models 001)

Also applies to engines/gearboxes: 715 350, 715 351, 715 361

AR26.50-G-0420-12E

Checking wear limit between synchronizer cone and sliding sleeve

Test and adjustment values for gear set

Number

Designation

Transmission
715.350

Transmissions 715.351/361

BE26.50-N-1004-01KL

Wear limit between synchronizer cone and sliding sleeve

mm

< 0.3

< 0.3

Checking wear limit between synchronizer cone and sliding sleeve

W26.50-0047-02

1 Insert synchronizer cone (1) into sliding sleeve (2).

2 Check wear dimension (x) between synchronizer cone (1) and sliding sleeve (2) using a feeler gauge (3).