ar2650b4744d

Dismantle, assemble drive shaft.

Type ar · topic 26.50 · version 0100 · 2016-02-12

Applies to: Manual transmission 713.741 with Vehicle 384.0Manual transmission 713.741 with Vehicle 384.1Manual transmission 713.741 with Vehicle 386Manual transmission 713.742 with Vehicle 682Manual transmission 713.744 with Vehicle 694.0Manual transmission 713.756 with Vehicle 693.0Manual transmission 713.757 with Vehicle 693.081Manual transmission 715.021 with Vehicle 682

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.50 Gear assembly, shafts, differential — Series 384 (models 0**, 1**) · Series 386 · Series 682 · Series 693 (models 0**, 081) · Series 694 (models 0**)

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.50 Shaft/gear/synchronization — Series 384 (models 0**, 1**) · Series 386 · Series 682 · Series 693 (models 0**, 081) · Series 694 (models 0**)

Also applies to engines/gearboxes: 713 741, 713 742, 713 744, 713 756, 713 757, 715 021

AR26.50-B-4744D

Dismantle, assemble drive shaft.

12.02.16

Manual transmission 713.741 with Vehicle 384.0

Manual transmission 713.741 with Vehicle 384.1

Manual transmission 713.741 with Vehicle 386

Manual transmission 713.742 with Vehicle 682

Manual transmission 713.744 with Vehicle 694.0

Manual transmission 713.756 with Vehicle 693.0

Manual transmission 713.757 with Vehicle 693.081

Manual transmission 715.021 with Vehicle 682

Dismantle, assemble drive shaft.

B26.50-0313-07

1 Safety ring

2 Split ring

3 Thrust ring

4 Bearing

5 Bearing inside race

6 Input shaft

Disassemble and assemble

1

Remove the safety ring (1) and the split ring (2)

Fix the main shaft, through the grooved profile, in a vise with protection jaws.

2

Remove the split ring (2)

Install: When installing the split ring (2), observe that it must be with its external chamfer turned upward.

Split rings play.

*BE26.50-B-1004-01B

3

Remove the thrust ring (3) and the bearing (4)

Install: When installing the thrust ring (3), observe that it must be with its external chamfer turned upward.

Danger!

Risk of injury on the skin or in the eyes by handling hot and incandescent objects

Wear gloves, clothes and safety goggles

AS00.00-B-0002-01A

4

Remove the bearing track (5) from the main shaft

Heat the bearing track (5) at approx. 100 °C and remove it with a proper mandrel.

Install: Fix the main shaft in a vise with protection jaws and heat the bearing track (5). After it cooling down, use a proper mandrel to make it to be properly seated and free from play.

5

Assemble in reverse order

Gear assembly

Número

Denominação

Gearbox 713.58/59; 713.72, 713.74; 713.75; 713.811, 715.021

BE26.50-B-1004-01B

Axial clearance of the bipartite rings of the primary tree

mm

0...0,01

Referenced documents