AR26.50-B-4744A | Dismantle, assemble drive shaft. | 12.02.16 |
Manual transmission 712.44, 718.05, 718.08, 718.63, 718.69, 718.73, 718.74, 718.77
B26.50-0182-10
1 Safety ring
2 Split ring
3 Bearing
4 Main shaft
5 Oil pump actuation pin (gearbox 718.053/080)
| Disassemble and assemble | ||
1 | Unlock and remove the safety ring (1) | Assemble: assemble the safety ring (1) and lock it in 4 points, with a distance of 85° from each other. | |
2 | Remove the split ring (2) | Assemble: use the proper device to assemble the split ring | |
Assemble: check the interference prescribed of the split ring and adjust it changing the rings for others with different thickness | |||
Split rings interference | |||
Split rings interference | |||
Split rings interference | |||
Split rings interference | |||
Gearbox 718.25/54/63/74/77 | |||
Gearbox 712.44, 718.69/73 | |||
3 | Pull the main shaft bearing (3) | Disassemble the main shaft assembly / bearing using a press Gearbox 718.053/080 Support the bearing (3) on the special tool and press the main shaft (4) until pull it out Assemble: heat the bearing at 120 °C and assemble it in the main shaft | |
4 | Assemble in reverse order |
Shafts
Número | Denominação | Gearboxes 718.05/08 | |||
BE26.50-B-1003-03A | Interference of the grooved ring for the fastening of the drive shaft bearing | mm | 0,01...0,02 | ||
Shafts
Número | Denominação | Gearboxes 718.63/74/77 | |||
BE26.50-B-1003-03B | Split ring interference for the fastening of the input shaft bearing | mm | 0,02...0,04 | ||
Shafts
Número | Denominação | Gearboxes 712.44; 718.69 | |||
BE26.50-B-1003-03C | Interference of the split ring for the fastening of the drive shaft bearing | mm | 0...0,05 | ||
Shafts
Número | Denominação | Gearboxes 718.73 | |||
BE26.50-B-1003-03D | Split ring interference for the fastening of the input shaft bearing | mm | 0...0,05 | ||
055 589 07 59 00
Device
000 589 58 63 00
Device