AR26.50-B-2000B | Remove/install transmission output flange | 12.02.16 |
Manual transmission 714.120, 714.124, 714.140, 714.144
T26.10-0005-11
1 Transmission shaft
2 Power output flange bolt
3 Spring ring and O-ring
| Remove and install | ||
Danger! | Risk of injuries by touching the heated retarder and burns from hot retarder oil | Carry out the jobs only with disconnected retarder. When carrying out jobs on a too hot retarder, wear protection gloves, protection clothes and safety glasses. | |
1 | Remove the bottom lining of engine compartment | ||
2 | Remove the transmission shaft | ||
Danger! | Risk of injuries in skin and eyes by handling heated or incandescent objects | Use protective gloves, protective clothes and safety glasses. | |
3 | Remove the power output flange | ||
| |||
| |||
| |||
4 | Install in reverse order | Installing: All self-locking nuts are to be replaced |
Gear set, shafts
Número | Denominação | Gearboxes 714.124/144 | |||
BA26.50-B-1001-01G | Bolt of retarder main shaft output flange | Nm | 450 | ||
717 589 00 31 00
Claw wrench
035 589 01 33 00
Puller
Referenced documents
- ar2640b247503e Remove/install output flange
- ar4110b0050a Remove/install propeller shaft
- as0000b000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as4330b000101a Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure