AR26.50-B-0425FC | Disassemble transmission main shaft | 12.02.16 |
Manual transmission 715.563 with Vehicle 693
Manual transmission 715.565 with Vehicle 693
B26.50-0316-09
1 Taper roller bearing
2 Safety lock
3 Coupling sleeve
4 Synchronizing body
5 Synchronizing cone
6 Synchronizing ring
7 Ring spring
8 3rd speed gear
9 Needle bearing
10 Lock
11 Pressure washer
12 Needle bearing
13 2nd speed gear
14 Ring spring
15 Synchronizing ring
16 Synchronizing cone
17 Lock
18 Coupling sleeve
19 Synchronizing body
20 Synchronizing cone
21 Ring spring
22 Synchronizing ring
23 1st speed gear
24 Needle bearing
25 Main shaft
26 Needle bearing
27 Crawler gear
28 Synchronizing body
29 Lock
30 Coupling sleeve
31 Reverse gear
32 Needle bearing
33 Taper roller bearing
34 Coupling fork
35 Sliding shoes
36 Sun gear
37 Locking ring
| Disassemble | ||
1 | Attach the main shaft (25) in the immobilizer device | Immobilizer device | |
2 | Remove the coupling sleeve (3) | ||
3 | Remove the taper roller bearing (1) | Manual pump | |
Hydraulic hose | |||
Hydraulic cylinder | |||
Adapter | |||
Adapter | |||
Claw | |||
4 | Remove the safety lock (2) | ||
5 | Remove the synchronizing body (4) | In the case of difficulty in using the three claws puller. | |
6 | Remove the synchronizing ring (6) with the ring spring (7) and the synchronizing cone (5) from the 3rd speed gear (8) | ||
7 | Remove the 3rd speed gear (8) with the needle bearing (9) | ||
8 | Remove the lock (10) | ||
9 | Remove the thrust washer (11) and the 2nd speed gear (13) | In the case of difficulty in using the three claws puller. | |
10 | Remove the needle bearing (12) | ||
11 | Remove the synchronizing ring (15) with the ring spring (14) and the synchronizing cone (16) | ||
12 | Remove the coupling sleeve (18) | ||
13 | Remove the lock (17) | ||
14 | Remove the synchronizing body (19) | In the case of difficulty in using the three claws puller. | |
15 | Remove the synchronizing ring (22) with the ring spring (21) and the synchronizing cone (20) from the 1st speed gear (23) | ||
16 | Remove the 1st speed gear (23) with the needle bearing (24) | ||
17 | Turn and attach the main shaft (25) in the immobilizer device | Immobilizer device | |
18 | Remove the lock-ring (37) | ||
19 | Extract the sun gear (36) | ||
20 | Remove the taper roller bearing (33) | Manual pump | |
Hydraulic hose | |||
Hydraulic cylinder | |||
Adapter | |||
Adapter | |||
Claw | |||
21 | Remove the reverse gear (31) and the needle bearing (32) | ||
22 | Remove the coupling fork (34) with the sliding shoes (35) | ||
23 | Remove the lock (29) and the coupling sleeve (30) | ||
24 | Remove the crawler gear (27) with the needle bearing (26) and the synchronizing body (28) |
652 589 00 33 21
Manual pump
652 589 00 33 23
Hydraulic hose (complete)
715 589 15 34 00
Hydraulic cylinder
715 589 12 34 00
Adapter
715 589 11 34 00
Adapter
715 589 00 34 00
Claw
715 589 09 34 00
Claw
315 589 02 31 00
Immobilizer device