Gear assembly
Número | Denominação | Gearbox 712.612 | |||
BE26.50-B-1003-01F | Main shaft tapered roller bearings pre-load | mm | 0,00...-0,15 | ||
712 589 01 31 00
Assembly support
715 589 00 37 00
Pliers
366 589 00 21 05
Extension
001 589 53 21 00
Dial indicator
W26.10-1059-03
1 Engage the 4th speed in the gearbox.
2 Screw the bolt (8) on the main shaft (4).
3 Screw the nut (6) with the washer (5) on the main shaft (4).
W26.10-1033-03
4 Install the dial gauge (10) with the lengthener (13) on the mounting rack (9).
5 Screw the bolt (7) face up with 15Nm to the main shaft (4), turn many times the drive shaft with the pliers 715 589 00 37 00.
6 Repeat at least 3 times operation 5.
7 Turn the drive shaft until the marks are leveled (12) with the lengthener (13) to the main shaft (4).
8 Reset the dial gauge (10).
9 Screw the bolt (7) face down with 15Nm to the main shaft (4), turn many times the drive shaft with the pliers 715 589 00 37 00.
10 Repeat the operation 9 at least 3 times.
11 Turn the drive shaft until the marks are leveled (12) with the lengthener (13) to the main shaft (4).
12 Check the dial gauge reading and determine which compensating washer is to be used.