AR26.45-W-0200A | Remove/install PTO transmission lock | 3.11.10 |
TRANSMISSION 712.611 /62 /63, 715.050 /060
with CODE (N80) Power take-off transmission lock
with CODE (GS1) "Manual" gearshift
TRANSMISSION 712.63, 715.060
with CODE (N80) Power take-off transmission lock
with CODE (GS1) "Manual" gearshift
TRANSMISSION 712.63, 715.060
with CODE (N80) Power take-off transmission lock
with CODE (GS3) "Hydraulic" gearshift
W26.10-1040-05
Shown on transmission with code (GS1) "Manual" gearshift
1 Shift housing
2 Pin
3 Gasket
4 Power take-off transmission lock
5 Bolts
S9 Neutral position switch
| Remove/install | ||
1 | Disconnect electrical connector and compressed air line from neutral position switch (S9) | ||
2 | Unscrew bolts (5) and remove PTO transmission lock (4) with gasket (3) | Installation: Replace seal (3). | |
Transmissions 712.62/63, 715.050/060 | |||
Transmission 712.611 | |||
3 | Remove pin (2) from shift housing (1) | ||
4 | Install in the reverse order |
Shift mechanism
Number | Designation | Trans-mission | Trans-missions | |
BA26.60-N-1017-01B | Bolt, PTO transmission lock to shift housing | Nm | 25 | 25 |
Shift mechanism