AR26.45-B-0065A | Disassembling and assembling intermediate gear | 12.02.16 |
Manual transmission 715.504, 715.517, 715.527 with CODE N57 (Transmission independent power take-off (NMV) i = 1.09) with CODE N04 (PTO, layshaft MB, 1b)
Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48) with CODE N04 (PTO, layshaft MB, 1b)
Manual transmission 715.564 with CODE N04 (PTO, layshaft MB, 1b)
W26.45-1026-04
1 Taper roller bearing (clutch side)
2 Outside race (clutch side)
3 Intermediate gear
4 Snap-ring
5 Separator washer
6 Bearing outside race (gearbox side)
7 Taper roller bearing (gearbox side)
| Disassemble and assemble | ||
1 | Remove the taper roller bearings (1) and (7). | The clutch side taper roller bearing is a little wider than the gearbox side taper roller bearing. | |
2 | Remove the bearing (2) outside race. | The clutch side taper roller bearing outside race is a little wider than the gearbox side taper roller bearing outside race. | |
3 | Remove the snap-ring (4) and remove the separating washer. | ||
4 | Remove the outside race of the bearing (6) of the gearbox side. | ||
5 | Install in reverser order. |