Disassembling power take-off · ar2645b0010a · Mercedes-Benz WIS

AR26.45-B-0010A

Disassembling power take-off

12.02.16

Manual transmission 715.504

W26.45-0013-09

W26.45-0014-09

1 Roller bearing

2 Cover attachment bolts

3 Case cover (version NA4/123)

4 Case cover (version NA4/124)

5 Input shaft

6 Needle bearing

7 Needle bearing

8 Gear

9 Coupling body

10 Sliding sleeve

11 Compensating washer

12 Ball bearing

13 Snap-ring

14 Centering ring

15 Compensating washer

16 Cover

17 Bolts

18 Roller bearing

19 Roller bearing inside race

20 Power output shaft (versions NA4/123-10b; NA4/124- 10b)

21 Power output shaft (versions NA4/123-10c; NA4/124- 10c)

22 Oil piping

23 Oil piping

24 Clamp screw

25 Clamp

26 Case (housing) of the power take-off (version NA4/123)

27 Case (housing) of the power take-off (version NA4/124)

28 Case gasket

29 Ball bearing

30 Compensating washer (versions NA4/123-10c; NA4/124-10c)

31 Snap-ring (versions NA4/123-10c; NA4/124-10c)

32 Centering ring

33 Sealing ring

34 Sealing ring (O-Ring)

35 Sliding control rod

36 Cylinder bolt

37 Pressure washers

38 Shifting cylinder

39 Cylinder gasket

40 Support ring

41 Control bar

42 Sealing ring

43 Shifting selector fork

44 Compression spring

45 Bushing

46 Oil draining plug

S15 Outlet switch

	Disassemble
1	Remove the power take-off.		AR26.45-B-0001C
2.1	Disassemble the cover (16) and remove the compensating washer (15).	 In versions 10b 10c.
2.2	Remove the second power outlet and the shifting case of the gearbox, remove the compensating washer (15).	 In versions 11b/b 11b/c.	AR26.45-B-0025A
3	Disassemble the bearing body of the second power output	 In version 11b/b.	AR26.45-B-0010-01A
			*000589293300
			*000589343300
			*BE26.45-B-1005-01A
4	Disassemble the control case of the second power output on the gearbox.	 In versions 11b/b; 11b/c.	AR26.45-B-0035A
5	Disassemble the power output flange and the cover.	 In version NA 10b.	AR26.45-B-0011A
7	Remove the centering rings (14) and (32).
8	Remove the switch (S15), and the sealing ring (33) from the PTO.
9	Remove the control cylinder (38) with the control bar (41)		AR26.45-B-0020C
10	Remove the case cover (3) or (4).	 Check if the roller bearing (1) and the bushing (45) present wear, if necessary, replace them.
11	Remove the oil piping (22).
12	Remove the compression spring (44) from the control selector fork (43).
13.1	Remove the power output shaft (20), the roller bearings (18) with the inside race (19) and the ball bearing (29).	 In version NA 10b.	AR26.45-B-0010-02A
			*000589303300
			*000589313300
			*000589343300
			*001589193300
13.2	Remove the power output shaft (21), the roller bearings (18) with the inside race (19) and the ball bearing (29).	 In version NA 10b.	AR26.45-B-0010-02B
			*000589303300
			*000589313300
			*000589343300
			*001589193300
14	Remove the input shaft (5) and the ball bearing (12).		AR26.45-B-0010-03A
			*000589283300
			*000589343300
15	Remove from the sliding sleeve (10), the control selector fork (43) and the sliding control bar (35).
16	Remove from the sliding control rod (35) the sealing ring (34).
17	Check the oil circulation in the piping (23) and in the case of any discrepancy, remove the pipe and solve the problem.

Test values for PTO

Número	Denominação		Gearboxes 715.5, NA4/123 code NB0-2 and NB4-NB9 NA4/124 code ND0-2 and ND4-NB9	Gearboxes 715.5, NA4/123 code NB3, NA4/124 code ND3


BE26.45-B-1005-01A	Depth for the assembly of the radial seal inside the bearing body	mm	-	-