ar2645b0002a

Remove/install hydraulic pump

Type ar · topic 26.45 · version 0100 · 2016-02-12

Applies to: Manual transmission 715.504

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.45 Power take-off, PTO transmission

EinPAS 17 Drivetrain/axle › 17.45 Power take-off › 17.45.40 Oil pump/oil duct/oil filter/oil cooling

Also applies to engines/gearboxes: 715 504

AR26.45-B-0002A

Remove/install hydraulic pump

12.02.16

Manual transmission 715.504

Remove/install hydraulic pump

W26.45-0011-11

1 Hydraulic pumps

2 Pump attachment nuts

3 Gaskets

4 Intermediate part

5 Compensating washer

	Remove and install
1	Remove the nuts (2), the washers and lift out the hydraulic pump (1).	 Whenever possible do not detach the hydraulic pipes, however, if they have to be detached, catch (and never re-use) the run-off hydraulic fluid.  Installing: Replenish the hydraulic fluid level.
			*BA26.45-B-1003-01E
2	Remove the intermediate part (4) and the compensating washer (5).	Only on version 10c units.
3	Install in reverse order.

PTO

Número	Denominação				Gearboxes 715.5 with CODE NB3 NA4/ 123-10c and ND3 NA4/ 124-10c	Gearboxes 715.5 with CODE NB7-9 NA4/ 123-11b/c and ND7-9 NA4/ 124-11b/c


BA26.45-B-1003-01E	Nuts attaching the hydraulic pump to the PTO			Nm	73	73