AR26.40-P-0330-07A | Measuring new intermediate plate, pressing in bearing outer races | Transmission with tapered roller bearing Include shims if necessary |
Workshop equipment
WE58.40-Z-1002-19A | Depth gage |
P26.40-0221-02
1 Measure distance "a" between contact face and turned groove for the main shaft bearing in the old and new intermediate plate with a support (approx. 300 mm long).
If the dimension "a" determined on the new intermediate plate does not correspond to the old one, appropriate shims must be attached.
Shims are available in thicknesses of 0.1; 0.3 and 0.5 mm.
2 Press in outer bearing races using a suitable alignment tool.