000 589 33 33 00
Puller
000 589 27 33 00
Puller
055 589 48 15 00
Mandrel
B26.30-0052-01
Remove
There are two needle bearings in the cover of the gearbox with the same dimensions that are to be removed as per step 1 and 2.
1- With the puller remove, from the gearbox cover the first needle bearing (10).
B26.30-0054-01
2- Turn the cover and with the puller remove the second needle bearing (10).
B26.30-0055-01
3- Remove the bushing (29) from the cover pressing it out with an appropriate mandrel.
B26.30-0056-01
4- Remove the sealing cover (25) with an appropriate mandrel.
B26.30-0057-01
5- Remove the bushing (26) with an appropriate mandrel.
B26.30-0058-01
Installing
6- With the puller install in the gearbox cover the first needle bearing (10).
B26.30-0059-01
7- Turn the cover and with the mandrel install the second needle bearing (10).
B26.30-0060-01
8- Apply long lasting grease on the bushing (29) and install it in the cover with an appropriate mandrel.
B26.30-0061-01
9- Install the bushing (26) until it is flush with the hole's edge. Utilize an appropriatemandrel and grease it with long lasting grease before installing it.
B26.30-0062-01
10- Assemble the sealing cover (25) so its is flush with the eating hole. Utilize an appropriated mandrel.