Remove/install gear control (GS) control unit · ar2620w2000a · Mercedes-Benz WIS

AR26.20-W-2000A

Remove/install gear control (GS) control unit

10.9.07

TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS7) Gear control II

W26.20-1198-09

1 Housing

2 Sealing ring

3 Sealing ring

4 Gasket

Y29 Splitter 1 solenoid valve (MS1)

Y30 Splitter 2 solenoid valve (MS2)

Y33 Gate 1 solenoid valve (MG1)

Y34 Gate 2 solenoid valve (MG2)

5 Intermediate plate

6 Gasket

A16 Gear control (GS II) control unit

Modification notes

24.8.07

Teach in gear control (GS) control unit, added.

Step 6

 	Remove/install
1	Remove gate module		AR26.20-W-1005A
2	Detach gear control (GS) control unit (A16) from housing (1)	 Installation: Replace seal (4).
			*BA26.20-N-1001-03A
3	Remove splitter 1 solenoid valve (MS1) (Y29), splitter 2 solenoid valve (MS2) (Y30), gate 1 solenoid valve (MG1) (Y33) and gate 2 solenoid valve (MG2) (Y34)	 Installation: Install new sealing rings (3).
4	Detach intermediate plate (5) from gear control (GS) control unit (A16)	 Installation: Install new sealing ring (2) and seal (6).
			*BA26.20-N-1001-03A
5	Install in the reverse order
6	Initializing gear control (GS) (A16) control unit		AR54.21-W-0009A

 Shift gate module

Number	Designation		Transmission 715.500/507/510/ 513/520/540 with code GS7


BA26.20-N-1001-03A	Bolt, control unit to intermediate plate	Nm	10