AR26.18-B-2000B | Remove/install gear shift cylinder | 12.02.16 |
Manual transmission 714.120, 714.124, 714.140, 714.144
T26.60-0020-01
Represented in the gearbox 714.691 with electro-pneumatic control (EPS) code G61
1 Speeds control cylinder
2 Control box
Y51 Gearbox control electro-magnetic valve EPS
Y52 Gearbox control electro-magnetic valve EPS
Y53 Gearbox control electro-magnetic valve EPS
Y54 Gearbox control electro-magnetic valve EPS
| Remove and install | ||
1 | Confirm whether the pneumatic tubes and the electric cables are damaged, replace them if necessary | ||
2 | Disconnect the electrical connections at the gearbox control electro-magnetic valves EPS (Y51, Y52, Y53, Y54) | Mark the electrical connections corresponding to the gearbox control electro-magnetic valves EPS (Y51, Y52, Y53, Y54). | |
Install: Pay attention to the designation of the electrical connections corresponding to the gearbox control electro-magnetic valves EPS (Y51, Y52, Y53, Y54). | |||
3 | Unfasten the pneumatic connections from the gears control cylinder (1) | ||
4 | Remove the gears control cylinder (1) from the control box (2) | Install: Replace and lubricate slightly the gears cylinder control bar ring joint (1). | |
| |||
| |||
5 | Install in reverse order |
Transmission pneumatic system
Número | Denominação | Gearbox 714.120/124, 714.140/144 | |||
BA26.18-B-1001-01A | Control cylinder fastening | Nm | 69 | ||
000 589 64 21 00
Torque meter wrench