Removing and installing oil cooler of torque converter clutch · ar2540g0600a · Mercedes-Benz WIS

AR25.40-G-0600A

Removing and installing oil cooler of torque converter clutch

12.3.96

ENGINE 602.941 in MODEL 408 with CODE (G30) torque converter clutch (TCC)

G25.40-3003-06

1 Bolt

2 Spacer sleeve

3 Bolt

4 Nut

5 Bracket

6 Radiator

7 Oil pipe

8 Oil pipe

9 Bolt

10 Oil cooler

 	Removal, installation
1	Slacken bolts (9) at bottom of radiator (6)
2	Unscrew bolt (3) with nut (4) on bracket (5)
3	Remove oil pipes (7 and 8) on oil cooler (10)		*BA25.40-N-1010-01A
		 Collect any oil running out in a suitable container.
4	Unscrew bolts (1) with spacer sleeves (2)	 Installation: First install oil pipes (7 and 8), then screw in oil cooler (10) with bolts (1) and spacer sleeves (2).
5	Push back radiator (6) and remove oil cooler (10) upwards	 Pay attention to damage.
6	Clean cooler fins of oil cooler (10)	 Do not damage cooler fins.
7	Check oil cooler (10)	 In the event of dirt, damage and leaks 
		Replace oil cooler (10).
8	Install in reverse order
9	Allow engine to idle
10	Check oil level in torque converter clutch and correct, if necessary		AP25.40-G-0200A
11	Check for leaks	 Visual inspection.

 Torque converter clutch (TCC)

Number	Designation			Engine 602.941 with TCC 270


BA25.40-N-1010-01A	Union nut (WAF 24) oil pipe on oil cooler of torque converter clutch	M201.5	Nm	65

ap2540g0200a Check oil level in torque converter clutch and correct if necessary