ar2210d1200c

Remove/install engine support

Type ar · topic 22.10 · version 0112 · 2006-07-25

Applies to: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Where it sits

Function group 1 Engine › 22 Major assembly suspension › 22.10 Major assembly bearings, major assembly carriers — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 0**, 6**) · Series 902 (models 0**, 6**) · Series 903 (models 0**, 6**) · Series 904 (models 0**, 6**) · Series 905 (models 6**)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.20 Engine suspension — Series 611 (models 981, 983, 987) · Series 690 (models 6**) · Series 901 (models 0**, 6**) · Series 902 (models 0**, 6**) · Series 903 (models 0**, 6**) · Series 904 (models 0**, 6**) · Series 905 (models 6**)

Also applies to engines/gearboxes: 111 979, 111 984, 612 981

AR22.10-D-1200C

Remove/install engine support

5.3.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

Remove/install engine support

D22.10-1002-08

Shown on engine 111

1 Left engine support

2 Bolt+washer

3 Screw

7 Right engine support

8 Heat guard

9 Engine lifting device

4 Washer

5 Bracket

6 Engine mount

Remove/install

1

Raise engine until the weight of the engine is no longer acting on the engine mounts

When lowering, place engine lightly onto the engine mounts (6), screw in the bolts (3) and tighten by hand until they make contact. Then, lower engine fully and tighten bolts (3) fully. Pay attention to bracket (5) and heat shield (8).

AR22.10-D-1260-01C

Retrofit kit (WBM 0307.00) for existing engine lifting fixture (WBM 0307.02)

*WE58.40-Z-1028-11A

WBM 0307.03

*WE58.40-Z-1007-11A

Engine 111.979/984

*BA22.10-N-1002-01H

Engine 611.981/983/987, 612.981

*BA22.10-N-1002-01L

2.1

Remove intake manifold support

Only on engine 611.981/983/987

2.2

Detach fuel filter at left engine support (1) and place to the side with fuel lines connected

Only engine 612.981

3

Unscrew bolts + washers (2) on both sides and take off engine supports (1 and 7) on both sides

Engine 111.979/984

*BA22.10-N-1001-01H

Engine 611.981/983/987, 612.981

*BA22.10-N-1003-01L

4

Install in the reverse order

Engine mounts, engine supports

Number

Designation

Engine 111.979

Engine 111.984

BA22.10-N-1001-01H

Engine support to crankcase

M8

Nm

20

20

BA22.10-N-1002-01H

Engine support to front engine mount

Nm

83

83

Engine mounts, engine supports

Number

Designation

Engine 611.981/
983/987

Engine 612.981

BA22.10-N-1002-01L

Bolt of engine support to front engine mount

Nm

83

83

BA22.10-N-1003-01L

Bolt of engine support to crankcase

Nm

20

20

Workshop equipment

WE58.40-Z-1007-11A

Engine lifting fixture

WE58.40-Z-1028-11A

Retrofit kit for engine lifting device

Referenced documents