ar2040p5050mud

Remove/install fan unit

Type ar · topic 20.40 · version 0101 · 2019-12-04

Applies to: Model 463 with engine 279

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.40 Fan, fan clutch — Series 463

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.45 Fan/fan clutch/fan drive — Series 463

Also applies to engines/gearboxes: 279 ***

AR20.40-P-5050MUD

Remove/install fan unit

03.12.2019

Model

463 with engine 279

Remove/install fan unit

P20.40-2212-08

Shown on ENGINE 157

3

Electrical plug connection

6

Retaining clips

4

Fan unit

7

Retaining lug

5

Screw/bolt

8

Retaining lug

Remove/install

1

Remove upper radiator crossmember


Model 463 with engine 279
as of model year 2013 up to model year 2019

AR62.30-P-2300GW

2

Disconnect electrical plug connection (3)

3

Lift/jack up vehicle

AR00.60-P-1000G

4

Remove underride guard

Helper required.

5

Remove screw/bolt (5) at fan unit (4)

6

Remove retaining clamps (6) on fan unit (4)

7

Remove fan unit (4) in the upward direction

Installation: Ensure that the fan unit (4) is correctly located in the guides with the retaining lugs (7, 8).

8

Install in the reverse order

Referenced documents